VICTOR 709H IP65 Thermocouple Calibration Equipment HART Communication Loop Calibrator
Item ID #VICTOR 709H
List Price: $500.00
Price: $500.00
Description:
VICTOR 709H HART Communication Loop Calibrator With IP65 Protection 0.01% Accuracy 0- 22mA DCA -2.000～28.000V DCV Measurement
General Specifications
Power supply : four 1.5V alkaline batteries(LR6)
Battery life : about 360mA /5V under the condition of 20mA with 1kΩ load
Max. permitted voltage : 30V(between any two terminals or between any terminal and earth ground)
Operating temperature : 0°C～50°C
Operating relative humidity : ≤ 80%RH
Storage temperature : ≤ - 20°C～60°C
Relative humidity for storage : ≤ 90%RH
Temperature co-efficiency : 0.1×Basic accuracy/ ℃(Temperature<18℃ or >28℃)
Protection level : IP65(Dust,Water spray)
Display :3.2 inch TFT color display
Size : 206(L)×97(W)×60(D)mm
Weight : 600g
Safety : EN61010-1:2001
Accessories : The test pen(H000000-00)
Industrial test lead(H000002-00)
Crocodile clip(H010000-00)
VC709H Quick guide_English(E100073-00)
VC709H Product qualification certificate_ English(E300018-00)
VC709H Product user manual _ English(E400022-00)
Insurance tube(D610000-00)
5alkaline battery(D620002-00)
Option PC infrared communications accessories package(Z070102-0000-00)
Linear power adapter(DC5V)(P070003-00)
Hook type tester(H000004-00)
Technical Data
| Project |
Referencemodel Performance parameters |
VICTOR 709H | |
| Source |
DC current (DCmA) |
Range | 0.000～22.000mA |
|
Accuracy ±(% of the set value +% of range) |
0.01%+0.015% | ||
| Resolution | 1uA | ||
|
Analog transmitter (SIMULATE) |
Range | 0.000～22.000mA | |
|
Accuracy ±(% of the set value +% of range) |
0.01%+0.015% | ||
| Resolution | 1uA | ||
| External power supply | 5 ～ 28V | ||
| Measurement |
DC voltage (DCV) |
Range | -2.000～28.000V |
|
Accuracy ±( % of Reading+ % of Range) |
0.01%+0.01% | ||
| Resolution | 1mV | ||
|
DC current (DCmA) |
Range | -4.000～33.000mA | |
|
Accuracy ±( % of Reading+ % of Range) |
0.01%+0.01% | ||
| Resolution | 1uA | ||
|
Loop power supply (LOOP) |
Range | 24V | |
| The maximum current | 22mA | ||
| Driving ability |
No HART resistance of 1KΩ. HART resistance is 750 Ω. |
||
| HART communication | Support HART general instructions and general application instructions. Able to read the device basic information, perform diagnostic testing and calibration to fine tune the most HART transmitter, can store up to 20 HART device configuration file. | ||
| Other functions | Protection grade | IP65 | |
| Backlight | √ | ||
| Backlight brightness adjustment | √ | ||
| 25％,100％step output | √ | ||
| Automatic ramp | √ | ||
| Automatic step | √ | ||
| mA,％Switch the display | √ | ||
| Auto Power-off | √ | ||
| Power Adaptation function | √ | ||
| Battery Low display | √ | ||
| PC online communication |
Compatible with infrared isolation USB serial communication interface. Supports industry standard SCPI commands, can realize remote control instrument by the device driver software. |
||
| Characteristic | |||
| Electrical safety | EN61010-1:2001 | ||
| Insulation | DC500V /50MΩ | ||
| EMC | EN61326-1:2006 | ||
| Authentication | CE | ||
| Display | 3.2 inch TFT color display | ||
| Power supply | 4×1.5V AA Alkaline battery / adapter | ||
| Size | 206 × 97 × 60 mm | ||
| Weight | About600g | ||
